E-Series E-Pulse™ Electric Wrench Pumps from Enerpac

Speed: 3,61
Reservoir capacity: 3,61 l/min
Type: Electric
EP3504T_EP3204J_1234_2000

FEATURES AND BENEFITS:

  • Two-stage pump with high by-pass pressure:  3,6 l/min at 200 bar, 0,52 l/min at 700 bar
  • Smart controls enable motor to maintain constant power across the pressure range
  • 24VDC power regulator minimizes effects of poor power supply
  • Six-piston block design provides even flow for smooth operation of cylinder or tool
  • Durable aluminium housing • Integrated heat exchanger minimizes heat build up 
  • High-efficiency permanent magnet, direct drive motor enables continuous use and long service life
  • Built-in thermal protection  • IP Rating: IP54 on the pump, IP67 on the pendant
  • Integrated calibrated pressure gauge
  • Interactive pendant with smart controls
  • Pendant and cord management system
  • Intelligent Auto-Cycle enables press and release actuation to cycle torque wrench until final torque is achieved
  • User can set pressure and operate in manual or auto-cycle mode
  • Convenient oil fill port, oil level indicator and automatic breather

Our employees have experience in the following areas:

Technical Sales

Technical Sales

The employees at kNm Hydraulikk are committed to delivering fast, accurate and safe solutions to our customers. We specialize in developing tailor-made solutions for our clients.
Contact
Rental

Rental

kNm Hydraulikk has an extensive selection of tools available in our rental park. We offer products for rental that can facilitate work within torque, tension, flanges, subsea bolt tightening and HSE products that prevent falling objects and crush injuries.
Design & Planning

Design & Planning

Some applications are more challenging than others. For example, there may be access problems with standard equipment. In such cases, the R&D department at kNm Hydraulikk can help you with tailor-made solutions.
Contact
Engineering Services

Engineering Services

kNm Hydraulikk have advisors that can assist in the calculation of bolted connections as well as the methods one should use.
Calibration

Calibration

All torque tools need to undergo periodic calibration to ensure optimal performance. kNm Hydraulikk calibrates tools according to current standards.
Calibration
Enerpac Services

Enerpac Services

kNm Hydraulikk is an authorized Enerpac Service Center. We maintain our status through a regulated review process conducted by Enerpac.
Enerpac Service Center - kNm Hydraulikk
Bolting

Bolting

Bolt tightening with the right equipment and torque prevents future leaks in flanges and mechanical connections. The right torque is crucial for optimal results.
Products
Courses

Courses

kNm Hydraulikk offer courses in flange work acording to NS-EN 1591-4 (formerly known as Norwegian Oil and Gas and OLF Guideline 118). The course provides knowledge in preparation, planning, execution, and documentation of work on bolt tensioning of flange connections on pressurized systems.
Courses
n%C3%B8yaktighet

RELIABILITY

Accurate tension of bolted connections requires knowledge and experience. Our products have patented solutions that combine both speed and accuracy.
kvalitet

QUALITY

Quality is our trademark, and our proof is our satisfied customers. kNm Hydraulikk holds its subcontractors and their products to a very high standard. We manufacture our equipment in the US, UK, Sweden, and Germany.