Aero WTP - Specifications

Technical Specifications


The Tentec WTP3 is a self contained electric driven high pressure hydraulic pump unit that can generate pressures of up to 1600 bar. The unit is a perfect match with Tentec bolt tensioning tools. One of the major features of the WTP3 Pump unit is the ability to totally remote control the pump from the controller hand grip. The WTP3 unit is designed to work in adverse environmental conditions, to ensure its durability the unit is certified to IP-56.
 
wtp-spec1
HYDRAULIC COMPONENTS:
Extremely high quality valves and components for a high duty
cicle to ensure reliability and durability of the unit.

FILTERS:
Low pressure return Filter and High Pressure Filter (10 μm) with
electronic clogging sensors and alarms in control box.

CONTROL HANDGRIP:
Ergonomic control handgrip to allow remote operation of the unit.
Controlling:- 
Start up
Pressure build up
Unit stop
Pressure relieve

All from the remote hand control grip with one single operation.

Includes miniature emergency button to automatically relieve
the pressure in case of any emergency.

The hand control grip is available with an optional electronic display to check the pressure from the hand control (Contact Tentec for more information.)

Available Power Supplies
Part Number Voltage - Phase
HTT.8900.100 230v - 60Hz
HTT.8900.200 115v - 60Hz
HTT.8900.300 440v - 60Hz
HTT.8900.400 230v - 50Hz
HTT.8900.500 380v - 50Hz
HTT.8900.600 400v - 50Hz
HTT.8900.700 690v - 60Hz
 
OIL CAPACITY:
Total Oil Capacity: 4.7L
Usable Oil: 1.7 L

PRESSURE:
Max Pressure: 1500 bar (available in higher pressurer configurations).

HYDRAULIC CONECTOR:
Quick Coupling CEJN 116 Series.

Oil Flow:
Gear Pump ( 3.9 L/min ) / Pressure Intensifier ( 0.195 L/min)
Piston Pump (1.1 L/min) / Pressure Intensifier ( 0.06 L/min)
Max Flow at Low Pressure (800 bar) : 0,25 L/min
Max Flow at High Pressure (over 800 bar) 0.06 L/min

OIL VISCOSITY RECOMMENDATIONS:
Oil recommended: Fluid HV for high pressure applications and protection towards wear, rust and oxidation.
According to specifications:
  • DIN 51524 PART. 2 TIPO HV
  • ISO-L-HV
  • AFNOR E 48603
  • DENISON HF-1, HF-2, HF-0
  • CINCINATI MILACRON P-68, P-69, P-70

High environment temperature (+40ºC): ISO VG-46
Low environment temperature ( bellow 0ºC): ISO VG-10
Standard Temperature: ISO VG-32

SIZE AND WEIGHT:
Length: 570mm.
Width: 280mm.
Height: 400 mm
Weight (empty): 37 Kg.
Weight (full): 41.7 Kg.
Bolting Solution Center
Atlas Copco
kNm Hydraulikk er Atlas Copcos foretrukne boltingpartner
kNm Hydraulikk er Atlas Copcos foretrukne boltingpartner
Atlas Copco
Bolting Solution Center
kNm Hydraulikk as
kNm Hydraulikk
Engelsvollveien 264
4353 Klepp Stasjon

Tlf:   + 47 95 25 13 10
Fax:   + 47 51 42 38 25

post@knm-hydraulikk.no
© Copyright 2015 kNm Hydraulikk